3 Copy
84
Copy
3
2 Pages per Side (Copying Two Pages onto One Sheet)
This feature allows you to copy two pages of a document together onto one side of a
single sheet of paper.
When you select [2 Pages per Side], [Auto %] is automatically selected in [Reduce/
Enlarge]. The machine automatically sets the copy ratio and makes copies of the
images so that they fit on the selected paper.
Note • When you deselect [Auto %] in [Reduce/Enlarge] (when you select another copy ratio),
image loss may occur depending on the image size of the document.
• Select a tray other than [Auto Select] in [Paper Supply]. When you select [Auto Select], the
tray containing A4 paper is selected. If no tray contains A4 paper, the machine selects a tray
based on the [Auto Paper Off] setting. For information on [Auto Paper Off], refer to "5 Tools"
> "Copy Service Settings" > "Copy Control" > "Auto Paper Off" in the Administrator Guide.
For information on how to copy four or eight pages of a document together onto one side of a single
sheet of paper, refer to "Pages per Side (Copying Multiple Pages onto One Sheet)" (P.116).
1 Select [2 Pages per Side].
1 Staple
This feature allows you to select whether to staple copied outputs at the top left corner.
The number of sheets that can be stapled is 2 - 50 (when 80 gsm paper is used).
Available paper types are: Plain (60 - 105 gsm), Reload (60 - 105 gsm), Recycled (60
- 105 gsm), Punched (60 - 105 gsm), Letterhead (60 - 105 gsm)*, Pre-printed (60 - 105
gsm), Lightweight (56 - 59 gsm), Heavyweight (106 - 169 gsm), Extra Heavyweight
(170 - 216 gsm), Bond (170 - 216 gsm), and Custom Paper 1 to 5.
*: Only when the HCF Kit is installed
Note • This feature does not appear for some models. An optional component is required. For more
information, contact our Customer Support Center.
1 Select [1 Staple].
To Next Page
Loading...
Need help?
General
