3 Copy
94
Copy
3
Photo
Select this option to make copies of photos.
Light Text
Select this option for text that requires enhancement, such as handwritten pencil text.
Text on See-Through Paper
Select this option to reduce blurring for tracing paper documents or to suppress
background shadows of lightweight documents.
Note • [Text on See-Through Paper] may not be displayed depending on the setting made in
System Administration mode. For information on how to display [Text on See-Through
Paper], refer to "5 Tools" > "Copy Service Settings" > "Copy Control" > "Original Type - See-
Through Paper" in the Administrator Guide.
Image Options (Adjusting Copy Density/Sharpness of Images)
This feature allows you to adjust the copy density and sharpness levels.
Note • [Lighten/Darken] under [Image Options] is the same as [Lighten/Darken] on the [Copy]
screen.
1 Select [Image Options].
2 Adjust the copy density and sharpness.
Lighten/Darken
Allows you to select from seven copy density levels between [Lighten] and [Darken].
Moving the arrow mark to the upper position makes the copy density lighter, and
moving to the lower position makes it darker.
Sharpness
Allows you to select from five sharpness levels between [Sharpen] and [Soften].
Selecting an upper cell on the bar makes the contours of images sharper, and selecting
a lower cell makes them softer.
To Next Page
Loading...
