Fax
4
4 Fax
234
4 Use the keyboard displayed on the touch screen to enter the destination and
password in the following format.
Note • You can specify up to 20 locations for relay recipients.
F Code Method
You can perform Relay Broadcast by registering the relay station's F code and
password (if necessary) to the machine.
Note • When performing Relay Broadcast with the F Code method, you can use a password if you
set a receive password for the relay station.
• When performing Relay Broadcast between Fuji Xerox manufactured machines that can be
used as both an initiating station and a relay station, we recommend that you use the fax
signal method.
• Confirm the F code (sub-address) and password of the target relay station.
1 Select the [Fax/Internet Fax Options] tab to
display the [Fax/Internet Fax Options]
screen.
2 Select [F Code].
3 Select [On].
4 Select the [F Code] box, and enter the F code with the numeric keypad.
Note • You can enter up to 20 digits for the F Code.
z
Relay Broadcast
The number of digits of the relay station ID:
1: When the relay station IDs and address numbers are two digits
2: When the relay station IDs and address numbers are three digits
Relay Broadcast Print
Directive
Relay
Station ID
Address
Number
Address
Number
Address
Number ....
Up to 20 digits
To Next Page
Loading...
