Fuji Xerox ApeosPort-IV C3375 User Manual

Output Format
147
Copy
3
Folding (Outputting Bi-Folded/Tri-Folded Paper)
This feature allows you to fold copies in half, or crease in half.
Important • When the Finisher-B1 or the Finisher-C1 is installed, do not remove output copies from the finisher
tray until all the output copies have been delivered.
Note • The supported paper orientation is only . Select the tray whose orientation is set to .
• This feature does not appear for some models. An optional component is required. For more
information, contact our Customer Support Center.
1 Select [Folding].
2 Select any option.
 Off
Does not fold copies.
 Single Fold
This option is displayed when the Booklet Maker Unit for Finisher-B1 (optional) or the
Finisher-C1 with Booklet Maker (optional) is installed.
When the the Booklet Maker Unit for Finisher-B1 (optional) is installed:
Creases copies in half.
When the Finisher-C1 with Booklet Maker (optional) is installed:
Folds copies in half.
Preset Repeat Image (Making Multiple Copies on a Single Sheet)
This feature allows you to repeatedly copy one original onto equally divided areas according
to the specified number of copies.

Fuji Xerox ApeosPort-IV C3375 Specifications

General

Print Resolution	1200 x 2400 dpi
Functions	Print, Copy, Scan, Fax
Duplex Printing	Yes
Memory (Standard)	2 GB
Copy Resolution	600 x 600 dpi
Scan Resolution	600 x 600 dpi
Fax Transmission Speed	33.6 kbps
Operating System Compatibility	Windows, Mac OS, Linux
Print Speed	35 ppm
Connectivity	Ethernet, USB
Paper Size	A3, A4, A5, B4, B5
Hard Drive	160 GB
Network Connectivity	Ethernet
Copy Speed (Color)	35 cpm
Copy Speed (Mono)	35 cpm