4 Fax
240
Fax
4
More Options
This section describes the features you can select on the [More Options] screen. The
following shows the reference section for each feature.
Remote Polling (Retrieving Files from Remote Machines)................................................................................................. 240
Store for Polling (Storing Files on the Machine that a Remote Machine can Retrieve) ............................................. 243
On-hook (Confirming Remote Machine Response Prior to Transmission)..................................................................... 244
1 Select [Fax/Internet Fax] on the [Services
Home] screen.
2 Select a feature on the [More Options] screen.
Remote Polling (Retrieving Files from Remote Machines)
Remote Polling is a feature that allows your machine to retrieve a file stored in a remote
machine. You are charged for the transmission fee.
This feature is used for Facsimile Information Services.
For information on Facsimile Information Services, refer to "Receiving Faxes" (P.254).
Note • The Remote Polling feature may not be available depending on the remote machine.
• This feature is not available for the Server Fax service.
• When you specify polling in combination with [Delay Start] on the [Fax/Internet Fax Options] screen,
you can retrieve a file at a specified time.
îš„ Remote Polling
You can retrieve a file stored on a remote machine by sending a polling request from your
machine. You can also retrieve files from multiple machines. This is called Multi-Polling.
îš„ Secure Polling (DTMF Method)
You can retrieve a file from a folder on a remote machine by sending a request from your
machine. A folder must be created on the remote machine. If the folder is passcode-
protected, you can retrieve a file confidentially.
Important • You cannot use polling to retrieve files from multiple remote folders simultaneously.
Note • The DTMF method is not available for the IP Fax (SIP).
To Next Page
Loading...
Need help?
General
