Fuji Xerox ApeosPort-IV C3375 User Manual

3 Copy
152
Copy
3
 Output/Offset
Allows you to select the output destination tray and offset operation.
z
Offset Stacking
This option is displayed when you select [Center Tray - Upper] or [Center Tray - Lower] for
the output destination. When an optional finisher is installed, this option is displayed
when you select [Center Tray] or [Right Middle Tray].
The offset is a function for slightly offsetting and outputting each paper stack to allow
you to distinguish the separations. You can select from [Offset per Set], [Offset per Job],
[Offset Every N Pages], [Offset Every N Sets], and [System Default].
Note • This feature does not appear for some models. An optional component is required. For more
information, contact our Customer Support Center.
• If you select [System Default], the setting in the System Administration mode will be effective. For
information on how to change the setting, refer to "5 Tools" > "Copy Service Settings" > "Copy
Defaults" > "Output Destination" in the Administrator Guide.

Fuji Xerox ApeosPort-IV C3375 Specifications

General

Print Resolution	1200 x 2400 dpi
Functions	Print, Copy, Scan, Fax
Duplex Printing	Yes
Memory (Standard)	2 GB
Copy Resolution	600 x 600 dpi
Scan Resolution	600 x 600 dpi
Fax Transmission Speed	33.6 kbps
Operating System Compatibility	Windows, Mac OS, Linux
Print Speed	35 ppm
Connectivity	Ethernet, USB
Paper Size	A3, A4, A5, B4, B5
Hard Drive	160 GB
Network Connectivity	Ethernet
Copy Speed (Color)	35 cpm
Copy Speed (Mono)	35 cpm