Fuji Xerox ApeosPort-IV C3375 User Manual

4 Fax
256
Fax
4
z
F Code (sub-address): 0 (to designate F Code transmission) and the folder number to store
the file in
z
Password (if necessary): the passcode of the folder to store the file in
Note • For IP Fax (SIP), the fax signal method and the F code method are available.
• For IP Fax (SIP), in communicating via VoIP gateway, the Sending to Folder with the fax signal
method is not available. Only the Sending to Folder with the F code method is available.
• The DTMF method is available for Remote Folder. The supported signals are numerals, "*", and "#".
Depending on the report print settings, a Folder Report may not be printed even after a file is received in a folder. For more
information on the Folder Report settings, refer to "5 Tools" > "Common Service Settings" > "Reports" > "Folder Report" in
the Administrator Guide.
For information on how to print a file stored in a folder, refer to "Printing Files in a Folder" (P.357).

Fuji Xerox ApeosPort-IV C3375 Specifications

General

Print Resolution	1200 x 2400 dpi
Functions	Print, Copy, Scan, Fax
Duplex Printing	Yes
Memory (Standard)	2 GB
Copy Resolution	600 x 600 dpi
Scan Resolution	600 x 600 dpi
Fax Transmission Speed	33.6 kbps
Operating System Compatibility	Windows, Mac OS, Linux
Print Speed	35 ppm
Connectivity	Ethernet, USB
Paper Size	A3, A4, A5, B4, B5
Hard Drive	160 GB
Network Connectivity	Ethernet
Copy Speed (Color)	35 cpm
Copy Speed (Mono)	35 cpm