Fuji Xerox ApeosPort-VI C3370 User Manual

Copy
106
Copy
3
1 Select [More].
2 Select the desired output color mode.
 Auto Detect
Automatically determines the color of the original document and makes copies in full color
if the original document is colored, or in single color (black) if the document is black-and-
white.
 Color
Copies in full color using all the four colors of toner: yellow, magenta, cyan, and black.
 Black & White
Copies in black and white regardless of the colors in the original document.
 Dual Color
Separates the colors of your document into the source colors and the other colors, and then
copies the document using two colors. Selecting [Dual Color] allows you to set the following:
 Source Color
Displays the [Source Color] screen on which you can select one or more colors from your
document to define them as source colors.
Reference
z
Refer to "[Source Color] Screen" (P.107).
 Target Area Color
Displays the [Target Area Color] screen on which you can select the target color to be used
in place of the selected source colors.
Reference
z
Refer to "[Target Area Color] Screen" (P.108).

Fuji Xerox ApeosPort-VI C3370 Specifications

General

Print Resolution	1200 x 2400 dpi
Copy Resolution	600 x 600 dpi
Scan Resolution	600 x 600 dpi
Functions	Print, Copy, Scan, Fax (optional)
Fax Speed	33.6 kbps
Print Speed	33 ppm (black/color)
Connectivity	Ethernet, USB, Wi-Fi
Memory	4 GB
Paper Input Capacity	1, 140 sheets
Paper Output Capacity	250 sheets
Supported Paper Sizes	A3, A4, A5, B4, B5, Legal, Letter, Executive, Folio, Oficio
Duplex Printing	Yes
PDL	PCL6, PostScript 3
Copy Speed	33 ppm (color/black)