Fuji Xerox ApeosPort-VI C3370 User Manual

Operations during Copying
89
Copy
3
4 Press the <Start> button.
Note
z
If you enter the same value as the number of copies that have already been printed, the machine will not
execute a copy job even when you press the <Start> button.
Interrupting the Copy Job
You can temporarily stop the copy job to have the machine process another job.
Important
z
Press the <Interrupt> button only after all the documents have been scanned. The machine does not accept
another job while it is scanning the documents, or when [Next Original] has been selected.
z
Even when the <Interrupt> button is pressed, the machine may not accept another copy job if 10 sets or less
are being copied using the document glass.
1 Press the <Interrupt> button.
The <Interrupt> button lights up to indicate that the machine is in the Interrupt mode.
2 Load a document and set features if necessary.
3 Specify the number of copy sets with the numeric keypad.
4 Press the <Start> button.
5 After you have finished making the interrupt copy, press the <Interrupt> button.
The <Interrupt> button goes out to indicate that the Interrupt mode is exited.
Note
z
If you used the document glass to copy the document, remove the document from the document glass.
6 Press the <Start> button.
The suspended copy job is resumed.

Fuji Xerox ApeosPort-VI C3370 Specifications

General

Print Resolution	1200 x 2400 dpi
Copy Resolution	600 x 600 dpi
Scan Resolution	600 x 600 dpi
Functions	Print, Copy, Scan, Fax (optional)
Fax Speed	33.6 kbps
Print Speed	33 ppm (black/color)
Connectivity	Ethernet, USB, Wi-Fi
Memory	4 GB
Paper Input Capacity	1, 140 sheets
Paper Output Capacity	250 sheets
Supported Paper Sizes	A3, A4, A5, B4, B5, Legal, Letter, Executive, Folio, Oficio
Duplex Printing	Yes
PDL	PCL6, PostScript 3
Copy Speed	33 ppm (color/black)