Printing and Deleting Stored Jobs
485
Job Status
11
Printing and Deleting Stored Jobs
This section describes how to print or delete jobs stored with the Secure Print or Sample Set
feature, or stored with the [Receive Control] setting of the Charge Print feature. The [Secure
Print Jobs & More] screen allows you to print or delete stored jobs.
1 Press the <Job Status> button.
2 Select the [Secure Print Jobs & More] tab.
z
[Secure Print] and [Private Charge Print] are not displayed simultaneously on the screen. For more information on the settings,
refer to "Tools" > "Authentication/Security Settings" > "Authentication" > "Charge/Private Print Settings" in the Administrator
Guide.
Secure Print
This feature allows you to temporarily store print data in the machine to print it with the
print command from the machine. The feature also enables you to set a passcode, which is
helpful to print confidential documents.
The following describes how to print or delete jobs stored with the Secure Print feature.
z
This feature does not appear when [Receive Control] in [Charge/Private Print Settings] is set to either of the
following:
z
Select [According to Print Auditron], and then select [Save as Private Charge Print Job] in [Job Login
Success].
z
Select [Save as Private Charge Print Job].
z
When [Save as Private Charge Print Job] or [Save as Charge Print Job] is selected in [Receive Control] under [Charge/Private Print
Settings], jobs will not be saved in [Secure Print] under [Secure Print Jobs & More] even if you select [Secure Print] on the print
driver. For more information, refer to "Tools" > "Authentication/Security Settings" > "Authentication" > "Charge/Private Print
Settings" in the Administrator Guide.
z
For information on how to operate a Secure Print job, refer to the print driver's help.
1 Select [Secure Print].
To Next Page
Loading...
Need help?
General
