Output Format
139
Copy
3
Booklet Creation (Creating a Bound Booklet)
This feature lays out pages so that booklets are formed when the output sheets are folded
in half. You can also set the binding shift and attach a cover when making booklets.
When the Booklet Maker Unit for Finisher B1 (optional) is installed, you can also crease the
output sheets in half, or staple the creased output sheets.
When the C3 Finisher with Booklet Maker (optional) is installed, you can also fold the
output sheets in half, or staple the folded output sheets.
z
Ensure that the actual orientation of the original document matches the [Original Orientation] setting on the
[Layout Adjustment] screen.
z
When theFinisher B1 is installed, do not remove outputs from the finisher tray until all the output sheets have
been delivered.
z
The machine copies four pages of the document onto one sheet of paper. If the number of pages in the
booklet is not a multiple of four, the remaining pages will be output as blank pages.
z
If [Auto Select] is selected in [Paper Supply], a tray specified in [Auto Paper Off] is automatically selected.
Change the setting if necessary. For information on [Auto Paper Off], refer to "Tools" > "Copy Service Settings"
> "Copy Control" in the Administrator Guide.
z
This feature does not appear for some models. An optional component is required. For more information,
contact our Customer Support Center.
1 Specify the orientation of the document in [Original Orientation] on the [Layout
Adjustment] screen.
2 Select [Booklet Creation] on the [Output Format] screen.
To Next Page
Loading...
Need help?
General
