Printing and Deleting Stored Jobs
497
Job Status
11
îš„ Yes
Starts printing the job. After printing, the job is deleted.
îš„ No
Cancels printing the job.
Charge Print
This feature authenticates users on the machine to prevent unauthorized users from
operating print jobs. When this feature is enabled, the machine prints only the jobs of
authenticated users. You can also configure the machine to store print jobs temporarily,
and then print them from the machine’s control panel.
If received print jobs are set to be saved as Charge Print under [Tools] > [Authentication /
Security Settings] > [Authentication] > [Charge / Private Print Settings] > [Receive Control],
the jobs are saved for each Billing ID. Any jobs that were not given a Billing ID on the print
driver are saved in [No User ID].
z
For more information on how to register user IDs on the machine, refer to "Tools" > "Accounting" > "Create/View User Accounts" in
the Administrator Guide.
z
Unlike the Private Charge Print feature, the Charge Print feature can store jobs without a user ID, such as e-
mail printing and print jobs sent from ContentsBridge or CentreWare Internet Services, and can print the jobs
after authenticating users.
z
[Charge Print] appears when [Save as Charge Print Job] is selected by using one of the following procedures in
the System Administration mode:
z
Select [Save as Charge Print Job] in [Receive Control].
z
Select [According to Print Auditron] in [Receive Control], and then select [Save as Charge Print Job] in [Job
Login Failure].
z
Select [According to Print Auditron] or [Save as Private Charge Print Job] in [Receive Control], and then
select [Save as Charge Print Job] in [Job without User ID].
z
For information on how to set Charge Print, refer to "Tools" > "Authentication/Security Settings" > "Authentication" > "Charge/
Private Print Settings" in the Administrator Guide.
The following describes how to print and delete a job stored with the Charge Print feature.
1 Press the <Log In/Out> button on the control panel, or select the login information field on
the touch screen.
To Next Page
Loading...
Need help?
General
