Fuji Xerox ApeosPort-VI C3370 User Manual

Job Status
496
Job Status
11
z
Drag the slider to change the ratio of the image size.
 Print Quantity
Specifies the number of print sets.
 Output Color
Displays the output color of the document to be printed.
 2 Sided Printing
Displays 1 Sided, Flip on Short Edge, and Flip on Long Edge.
 Booklet Creation
Displays Left/Top Bind and Right/Bottom Bind.
Note
z
This item is displayed when the booklet layout is set using a printer driver.
z
When the orientation of booklet creation cannot be detected, "Booklet Creation" is displayed only.
 Print
Prints the Delayed Print job. After printing, the job is deleted. If printed manually, the job
will not be printed at the specified time.
Reference
z
Refer to "When [Print] is Selected" (P.496).
When [Print] is Selected
1 Select [Yes].
Note
z
The screen shown here does not appear if [Print Job Confirmation Screen] is set to [Disabled] in the System
Administration mode. If [Disabled] is selected, the machine automatically deletes the job after printing
without displaying the confirmation screen. For more information, refer to "Tools" > "Stored File Settings" >
"Print Job Confirmation Screen" in the Administrator Guide.

Fuji Xerox ApeosPort-VI C3370 Specifications

General

Print Resolution	1200 x 2400 dpi
Copy Resolution	600 x 600 dpi
Scan Resolution	600 x 600 dpi
Functions	Print, Copy, Scan, Fax (optional)
Fax Speed	33.6 kbps
Print Speed	33 ppm (black/color)
Connectivity	Ethernet, USB, Wi-Fi
Memory	4 GB
Paper Input Capacity	1, 140 sheets
Paper Output Capacity	250 sheets
Supported Paper Sizes	A3, A4, A5, B4, B5, Legal, Letter, Executive, Folio, Oficio
Duplex Printing	Yes
PDL	PCL6, PostScript 3
Copy Speed	33 ppm (color/black)