Fax Procedure
191
Fax
4
4 Select each tab, and select a feature as necessary.
z
When you press the <Power Saver> button while configuring the features, you can select whether to enable the 2 Sided (Skip Blank
Pages) feature. For more information on [2 Sided (Skip Blank Pages)], refer to "2 Sided (Skip Blank Pages)" (P.244).
The following shows the reference section for each tab.
z
"Fax/Internet Fax" (P.224)
z
"Layout Adjustment" (P.246)
z
"Fax/Internet Fax Options" (P.254)
z
"More Options" (P.278)
Step 3 Specifying Destinations
Three methods are available to specify recipients: by phone number, by address number,
and by group dial number. The following shows input methods supported by each method.
* : There are two ways in which address numbers and stored programs are assigned to the one-touch buttons. Select either of the
following:
[Type 1]
The buttons 1 to 70 are used for address numbers and they correspond to the registered
address numbers 0001 to 0070, while the buttons M01 and M02 are used for stored
programs and they correspond to the registered stored programs 1 and 2.
[Type 2]
The buttons 1 to 60 are used for address numbers and they correspond to the registered
address numbers 0001 to 0060, while the buttons 61 to 70, M01, and M02 are used for
stored programs and they correspond to the registered stored programs 1 to 12.
Numeric Keypad One-Touch buttons Address Book
Phone Number O X X
Address Number
(Speed Dialing)
4 digits (0001 to
2000)
2 digits (1 to 70) or (1 to
60)*
From the list tab
and index
3 digits + *
(nnn0 to nnn9)
2 digits + *
(nn00 to nn99)
Group Dial Number # + 2 digits X O
O : Available
X : Not available
To Next Page
Loading...
Need help?
General
