Fuji Xerox ApeosPort-VI C3370 User Manual

Copy
118
Copy
3
 Normal
Always copies a document with the density balance set to "0" for the four toner colors:
yellow, magenta, cyan, and black.
 Basic Color
Allows you to adjust the density level for each toner color: yellow, magenta, cyan, black.
 Advanced Color
Allows you to adjust the density level for each toner color (yellow, magenta, cyan, black)
which is divided to [Highlights], [Midtones], and [Shadows].
 Highlights
Allows you to adjust the color strength of low-density areas.
Example: If low-density yellow is printed darker, adjust the color strength in the minus (-)
direction under [Yellow Balance] > [Highlights].
 Midtones
Allows you to adjust the color strength of medium-density areas.
Example: If medium-density yellow is printed lighter, adjust the color strength in the plus
(+) direction under [Yellow Balance] > [Midtones].
 Shadows
Allows you to adjust the color strength of high-density areas.
Example: If high-density yellow is printed lighter, adjust the color strength in the plus (+)
direction under [Yellow Balance] > [Shadows].

Fuji Xerox ApeosPort-VI C3370 Specifications

General

Print Resolution	1200 x 2400 dpi
Copy Resolution	600 x 600 dpi
Scan Resolution	600 x 600 dpi
Functions	Print, Copy, Scan, Fax (optional)
Fax Speed	33.6 kbps
Print Speed	33 ppm (black/color)
Connectivity	Ethernet, USB, Wi-Fi
Memory	4 GB
Paper Input Capacity	1, 140 sheets
Paper Output Capacity	250 sheets
Supported Paper Sizes	A3, A4, A5, B4, B5, Legal, Letter, Executive, Folio, Oficio
Duplex Printing	Yes
PDL	PCL6, PostScript 3
Copy Speed	33 ppm (color/black)