Fuji Xerox ApeosPort-VI C3370 User Manual

Fax
284
Fax
4
1 Pick up the telephone receiver, or select [On-hook (Manual Send/Receive)].
2 Select any option.
 Manual Send/Manual Receive
Use the drop-down menu to switch between [Manual Send] and [Manual Receive].
z
Manual Send: Allows you to check if connection is established before sending a fax.
z
Manual Receive: Allows you to receive a fax manually, such as Facsimile Information
Services.
 Entering a destination
Use alphanumeric characters to specify a destination.
Note
z
Some touch-tone services may not be available even if you set your telephone to send tones.
z
When the line type is set to a tone line, [:] (Tone) is not displayed on the screen. If you want to send tones (or
to use the touch-tone services) while using a pulse line, select [:] (Tone).
 More Characters
Select this button to display a symbol screen, allowing you to use symbols to specify a
destination.
 Line Cut
Cuts the line connected.

Fuji Xerox ApeosPort-VI C3370 Specifications

General

Print Resolution	1200 x 2400 dpi
Copy Resolution	600 x 600 dpi
Scan Resolution	600 x 600 dpi
Functions	Print, Copy, Scan, Fax (optional)
Fax Speed	33.6 kbps
Print Speed	33 ppm (black/color)
Connectivity	Ethernet, USB, Wi-Fi
Memory	4 GB
Paper Input Capacity	1, 140 sheets
Paper Output Capacity	250 sheets
Supported Paper Sizes	A3, A4, A5, B4, B5, Legal, Letter, Executive, Folio, Oficio
Duplex Printing	Yes
PDL	PCL6, PostScript 3
Copy Speed	33 ppm (color/black)