Fuji Xerox ApeosPort-VI C3370 User Manual

Broadcast
289
Fax
4
F Code Method
You can perform Relay Broadcast by registering the relay station’s F code and password (if
necessary) to the machine.
Note
z
When performing Relay Broadcast with the F Code method, you can use a password if you set a receive
password for the relay station.
z
When performing Relay Broadcast between Fuji Xerox manufactured machines that can be used as both an
initiating station and a relay station, we recommend that you use the fax signal method.
z
Confirm the F code (sub-address) and password of the target relay station.
1 Select the [Fax/Internet Fax Options] tab to display the [Fax/Internet Fax Options] screen.
2 Select [F Code].
3 Select [On].
4 Select the [F Code] box, and enter the F code with the numeric keypad.
Note
z
You can enter up to 20 digits for the F Code.
z
Relay Broadcast
The number of digits of the relay station ID:
1: When the relay station IDs and address numbers are two digits
2: When the relay station IDs and address numbers are three digits
z
Print Directive
Printing/not printing at the relay station
Relay
Broadcast
Print
Directive
Relay
Station ID
Address
Number
Address
Number
Address
Number
....
Up to 20 digits

Fuji Xerox ApeosPort-VI C3370 Specifications

General

Print Resolution	1200 x 2400 dpi
Copy Resolution	600 x 600 dpi
Scan Resolution	600 x 600 dpi
Functions	Print, Copy, Scan, Fax (optional)
Fax Speed	33.6 kbps
Print Speed	33 ppm (black/color)
Connectivity	Ethernet, USB, Wi-Fi
Memory	4 GB
Paper Input Capacity	1, 140 sheets
Paper Output Capacity	250 sheets
Supported Paper Sizes	A3, A4, A5, B4, B5, Legal, Letter, Executive, Folio, Oficio
Duplex Printing	Yes
PDL	PCL6, PostScript 3
Copy Speed	33 ppm (color/black)