Fuji Xerox ApeosPort-VI C3370 User Manual

Store to USB
377
Scan
5
USB memory device again or select [Store to USB] on the Services Home screen. For information on other
ways to exit the Power Saver mode, refer to "Exiting the Power Saver Mode" (P.56).
z
The screen status will be one of the above even when a USB memory device in which only encrypted data is
stored is inserted or USB memory device in unsupported format is inserted. In such case, a warning message
appears during operation and the operation is aborted.
z
The screen status will be one of the above when a commercially available Memory Card Reader is inserted
into the USB memory slot of the machine. It is the same if no media is inserted into the Memory Card Reader.
z
If a commercially available Memory Card Reader is used and it is left inserted all the time, the machine does
not detect media even when they are inserted into the slot of the Memory Card Reader.
z
Screen display remains the same when the inserted USB memory device or Memory Card is removed. Press
the <Services Home> button or do anything else to change the screen display before starting next operation.
When the [USB Device Detected] Screen Appears
1 Select [Store to USB].
2 The [Store to USB] screen appears.
When the [Store to USB] Screen Appears
Select a feature on the [Store to USB] screen.

Fuji Xerox ApeosPort-VI C3370 Specifications

General

Print Resolution	1200 x 2400 dpi
Copy Resolution	600 x 600 dpi
Scan Resolution	600 x 600 dpi
Functions	Print, Copy, Scan, Fax (optional)
Fax Speed	33.6 kbps
Print Speed	33 ppm (black/color)
Connectivity	Ethernet, USB, Wi-Fi
Memory	4 GB
Paper Input Capacity	1, 140 sheets
Paper Output Capacity	250 sheets
Supported Paper Sizes	A3, A4, A5, B4, B5, Legal, Letter, Executive, Folio, Oficio
Duplex Printing	Yes
PDL	PCL6, PostScript 3
Copy Speed	33 ppm (color/black)