Fuji Xerox ApeosPort-VI C3370 User Manual

Job Status
492
Job Status
11
 (Entire view)
An entire preview image is displayed.
In the entire view, the file name, Stored Date, Pages, and setting values of Staple and Hole
Punch are displayed on the right side of the preview area.
Double-tap the preview area to move to the enlarged view.
 (Enlarged view)
A previewed image is enlarged or reduced.
In the enlarged view, the following operations are available:
z
Drag or flick the enlarged image to move the position to be displayed.
z
Double-tap the previewed image to change the ratio of the image size.
z
Drag the slider to change the ratio of the image size.
 Print Quantity
Specifies the number of print sets.
 Output Color
Displays the output color of the document to be printed.
 2 Sided Printing
Displays 1 Sided, Flip on Short Edge, and Flip on Long Edge.
 Booklet Creation
Displays Left/Top Bind and Right/Bottom Bind.
Note
z
This item is displayed when the booklet layout is set using a printer driver.
z
When the orientation of booklet creation cannot be detected, "Booklet Creation" is displayed only.

Fuji Xerox ApeosPort-VI C3370 Specifications

General

Print Resolution	1200 x 2400 dpi
Copy Resolution	600 x 600 dpi
Scan Resolution	600 x 600 dpi
Functions	Print, Copy, Scan, Fax (optional)
Fax Speed	33.6 kbps
Print Speed	33 ppm (black/color)
Connectivity	Ethernet, USB, Wi-Fi
Memory	4 GB
Paper Input Capacity	1, 140 sheets
Paper Output Capacity	250 sheets
Supported Paper Sizes	A3, A4, A5, B4, B5, Legal, Letter, Executive, Folio, Oficio
Duplex Printing	Yes
PDL	PCL6, PostScript 3
Copy Speed	33 ppm (color/black)