Fuji Xerox DocuCentre 9000 - Organization of this Guide

2 Product Overview
14
Product Overview
2
No. Component Function
26 Interposer
(cover / separator tray)
Load paper for covers and separators. Paper loaded here cannot be
used for copying and printing.
27 De-curl button Press this button to decurl copied paper.
28 Output tray Receives copies when you select [Automatic sorting], [Collated],
[Uncollated] or normal copy.
29 Finisher tray Receives copy when you select stapled, punched and Z-folded copies.
30
Booklet output tray
*1
Receives copies when you select Bi-Fold or Bi-Fold + Stapling.
31
Booklet output tray button
*1
Press this button to deliver booklets to removal position.
32 Right cover Open to clear paper jam; replace staples or clear jammed staples; or
replace the scraps from the puncher.
33
Staple cartridges for
booklet
*1
The machine provides the staple cartridge. Remove this cartridge to
replace staples and clear staple jams.
34 Staple Scrap Container Collects the scraps from the stapler. Remove this cartridge to replace
the staple scrap container.
35 Staple cartridge This cartridge contains staples. Remove this cartridge to replace staples
and clear staple jams.
36 Punch scrap container Collects the scraps from the puncher. Open throw away the scraps.
26
27
28
29
30
31
32
33
34
36
35
38
39
37