Fuji Xerox DocuCentre 9000 - Auto Exposure (Erasing the Background Color of Documents); Sharpness (Adjusting Document Sharpness)

Network Setting Items (Port/Protocol) for CentreWare Internet Services
73
Using CentreWare Internet Services
9
E-mail
Enabling the ports
This section describes the procedure to enable the ports that are used for the e-mail
feature.
1 Start a web browser.
2 Enter the machine’s IP address or the Internet address to the address entry column
on the browser, and press the <Enter> key.
z
Example of the IP address entry
http://192.168.1.1/
z
Example of the Internet address entry
http://myhost.example.com/
Note • When specifying a port number, add ":" and a port number to the end of the Internet
address.
3 Click the [Properties] tab.
4 Click [Start Port].
5 Enable the ports which are used for the e-mail feature.
1) Select the [Enable] check box for [Receive E-Mail] when using the mail print
feature.
2) Select the [Enable] check box for [Send E-Mail] when using the scan E-mail
feature.
3) Select the [Enable] check box for [Mail Notice Service] when using the mail notice
or job completion notice feature.
6 Reflect the values as the machine’s setting values.
1) Click the [Apply New Settings]. A screen to enter the user name and password will
be displayed.
2) Enter the System Administrator UserID and password into [User Name] and
[Password], and then click [OK].
Note • The default User ID value is "11111" and password is "x-admin".
3) The right frame on the web browser will change to the machine reboot display.
4) Click [Reboot]. The machine will reboot and the setting value will be reflected.