To Next Page
J
Jennifer BrownAug 1, 2025
Why is my Fuji Xerox DocuCentre 9000 not turning on?
- LlsandersAug 1, 2025
There are several reasons why your Fuji Xerox All in One Printer might not be turning on: * The power switch on the machine might be off. Turn the power switch on. * The power cord might not be properly plugged into the power outlet or disconnected from the machine. Turn the power switch off, firmly plug in the power cord, and then turn the power switch back on. * The power supply might not be of the correct voltage. Ensure that the power supply is 200-240 V (volts), 15 A (amperes), and that the power capacity is compatible with the machine's specified maximum power consumption (2.8 - 3.1 KVA). * The printer might be in Power Saver mode. Press the button on the control panel to exit Power Saver mode.
General
