Scanning Procedure
35
Basic Operation
3
Step2 Selecting Features
You can select features from the [Basic Scanning] tab.
From the [Menu] tab, you can select from 4 scan modes:E-mail, Scan to Mailbox, Job
Template, and Scan to FTP/SMB.
E-mail
Scans a document and sends the scanned data as an e-mail attachment.
Scan to Mailbox
Scans a document and saves the scanned data to the machine’s mailbox.
Create a Mailbox in advance. For information about Mailbox creation, refer to "Registering Mailboxes"
(P.41).
Job Template
Scans a document after specifying the file (job template) set with scanning conditions,
information about the transfer destination server and other information.
Scan to FTP/SMB
Scans a document and sends the scanned data to a network computer via the FTP or
SMB protocols.
Note • Features displayed may vary depending on the model you are using.
• When using the Auditron mode, a UserID and password might be required. Ask the machine
administrator for the UserID and password.
• The machine’s network settings must be configured in order to use the scan features. For
information about network settings, refer to the Network Administrator Guide.
The following is an explanation of how to use the Scan to Mailbox feature.
1 Press the <All Services> button.
2 Select [Scan to Mailbox].
<All Services> button
To Next Page
Loading...
Need help?
General
