Configuration of E-mail
93
Using Scan Service
11
2) Select [Close].
5 Configure the Domain restriction
1) Select [Domain Filter] and set the following items.
z
Domain filtering
Select one from [Off], [Enter Permitted Domain Names], or [Enter Rejected Domain
Names].
z
[Domain 1] - [Domain 50]
Specify up to 50 domains if either [Enter Permitted Domain Names] or [Enter
Rejected Domain Names] has been selected for [Domain Filter].
2) Select [Close].
6 Select [Close] repeatedly until the [System Settings] screen is displayed.
7 Select [Exit].
8 After the machine is restarted, print out the Printer Settings List to confirm that each
item is configured.
For information about how to print a settings list, refer to [Print Report/List] in Chapter 12, [Machine
Status], of the User Guide.
To Next Page
Loading...
