12 Using the Scan Service
118
Using the Scan Service
12
z
Example of the Internet address entry
http://myhost.example.com/
Note • When specifying a port number, add “:” and the port number to the end of the Internet
address.
3 Click the [Properties] tab.
4 Click [Start Port].
5 Select the [UDP] check box under [SNMP].
6 Reflect the values as the machine's setting values.
1) Click [Apply].
2) Enter the System Administrator user ID and passcode into [User Name] and
[Password], and click [OK].
Note • The default user ID is “11111” and the default passcode is “x-admin”.
3) The right frame on the web browser will change to the machine reboot display.
4) Click [Reboot Machine]. The machine will reboot and the setting value will be
reflected.
Configuration on a Computer
For information on how to configure a computer, refer to the online help of CentreWare
Internet Services.
To Next Page
Loading...
