Network Setting Items (Port/Protocol) for CentreWare Internet Services
87
Using CentreWare Internet Services
10
4) Set [Login Name].
5) Set [Password].
7 Configure the settings for sending e-mail.
1) Specify a maximum size (capacity) for sending e-mail in [Maximum E-mail Size].
Note • Set this item when using the E-mail or iFax feature.
2) Specify the number of pages to be split for sending e-mail in [Max. Number of
Pages for Split Send].
Note • Set this item when using the E-mail or iFax feature.
8 Reflect the values as the machine's setting values.
1) Click [Apply]. A screen to enter the user name and passcode will be displayed.
2) Enter the System Administrator user ID and passcode into [User Name] and
[Password], and click [OK].
Note • The default user ID is "11111" and the default passcode is "x-admin".
3) The right frame on the web browser will change to the machine reboot display.
4) Click [Reboot Machine]. The machine will reboot and the setting values will be
reflected.
POP3
This section describes the POP3 server settings.
Note • Set this item when using the E-mail Printing or iFax feature and [POP3] is specified for
[Receiving Protocol].
1 Start a web browser.
2 Enter the machine's IP address or the Internet address to the address box on the
browser, and press the <Enter> key.
z
Example of the IP address entry
http://192.168.1.1/
z
Example of the Internet address entry
http://myhost.example.com/
Note • When specifying a port number, add ":" and the port number after the Internet
address.
To Next Page
Loading...
