Fuji Xerox DocuCentre-II 3005

10 Using CentreWare Internet Services
78
Using CentreWare Internet Services
10
When selecting an existing destination
Use the [Trap Notification] pull-down menu to select a destination, and proceed to step
9.
When registering a new destination or when modifying the settings for an
existing destination
1) Use the [Trap Notification] pull-down menu to register a new destination or to select
an existing destination.
2) Click [Edit]. A window appears prompting you to enter the user name and
passcode.
3) Enter the system administrator’s user ID and passcode into [User Name] and
[Password] respectively, and then click [OK].
Note • The factory default user ID and passcode are [11111] and [x-admin] respectively.
4) Select a transport protocol from [Transport].
5) If you selected [IPX] under [Transport], set [Network Number (IPX)], [MAC Address
(IPX)], [Socket Number (IPX)], [Trap Version], [Community String (Trap
Notification)], and [Notification Event].
6) If you selected [UDP] under [Transport], set [IP Address (UDP)], [Port Number
(UDP)], [Trap Version], [Community String (Trap Notification)], and [Notification
Event].
Note • Do not use the existing port numbers.
7) Click [Apply].
8) The right frame on the web browser will change to the machine reboot display.
9) Click [Reboot Machine]. The machine will reboot and the setting value will be
reflected.
9 Reflect the values as the machine's setting values.
1) Click [Apply]. A screen to enter the user name and passcode will be displayed.
2) Enter the System Administrator user ID and passcode into [User Name] and
[Password], and click [OK].
Note • The default user ID is “11111” and the default passcode is “x-admin”.
3) The right frame on the web browser will change to the machine reboot display.
4) Click [Reboot Machine]. The machine will reboot and the setting value will be
reflected.