Fuji Xerox DocuCentre-II 3005

10 Using CentreWare Internet Services
84
Using CentreWare Internet Services
10
1 Start a web browser.
2 Enter the machine's IP address or the Internet address to the address box on the
browser, and press the <Enter> key.
z
Example of the IP address entry
http://192.168.1.1/
z
Example of the Internet address entry
http://myhost.example.com/
Note • When specifying a port number, add “:” and the port number to the end of the Internet
address.
3 Click the [Properties] tab.
4 Set the e-mail addresses for the machine and administrator.
1) Click [Description].
2) Set [Administrator’s E-mail Address].
3) Set [Machine’s E-mail Address].
5 Reflect the values as the machine's setting values.
1) Click [Apply]. A screen to enter the user name and passcode will be displayed.
2) Enter the System Administrator user ID and passcode into [User Name] and
[Password], and click [OK].
Note • The default user ID is “11111” and the default passcode is “x-admin”.
6 Click [+] on the left of [Protocol Settings] to display the items in the folder.
7 Click [TCP/IP].
8 Set [Host Name].
9 Set the DNS information.
Note • The DNS settings are required when the addresses for a POP3 server and a SMTP server
are set with the domain name instead of their IP addresses.
1) Select the [DHCP] check box if using DHCP for [Get DNS Server Address].
2) Set [DNS Server Address 1 - 3].
Note • This item is not necessary if [DHCP] has been specified for [Get DNS Server Address].
3) Set [DNS Domain Name].
4) Select the [On] check box when using [Generate Domain Search List
Automatically].
5) Set [Domain Name 1 - 3].
6) Set [Connection Time-Out].
7) Select the [On] check box to enable [Dynamic DNS Update].
10 Reflect the values as the machine's setting values.
1) Click [Apply].
2) The right frame of the web browser will change to the machine reboot display.
3) Click [Reboot Machine]. The machine will reboot, and the setting value will be
reflected.
11 Click [E-mail] in the [Protocol Settings] folder.
12 Set the protocol using the [Receiving Protocol] pull-down menu.
Note • Set this item when using the E-mail Printing or iFax feature.