Media Print - Photos Trouble
443
Problem Solving
14
Media Print - Photos Trouble
The possible symptoms, causes, and remedies for problems when using Media Print -
Photos are as follows:
Symptom Cause Remedy
The <Access>
indicator of the
Memory Card
Reader is not lit
up.
Is the USB cable connected
correctly?
Disconnect the USB cable, and then
securely insert the USB cable into the
connector.
[Media Print -
Photos] is not
displayed on the
[Services Home]
screen.
The software options of the
USB Media Print Kit is not
recognized.
Properly set the software options or
disconnect the USB cable, and then
securely insert the USB cable into the
connector.
A blank sheet of
paper is output.
Files that cannot be printed
(image files in other than
DCF1.0 format) are
included among the files
specified for printing.
Files that cannot be printed (image files in
other than DCF1.0 format) are not printed
with index printing. Specify printing again,
excluding the images not displayed for
index printing.
Note • Note that editing or saving
DCF1.0-format image files on a
computer makes those files' format
other than DCF1.0.
To Next Page
Loading...
