15 Appendix
626
Appendix
15
Color Effect for Dual Color Copy
To extract colors for dual color copy, adjusting the colors of the document is required
in advance.
Our service representative performs the adjustment. Contact our Customer Support
Center.
Auto Contrast
The machine does not offer the [Auto Contrast] feature for [Color Effects].
Multiple-Up for Black & White and Color Mixed Documents and Meter Count
If you copy a document that contains black & white and color pages by specifying
[Pages per Side], an output sheet that has both black & white and color pages will be
counted as a color page.
Copy and Simple Copy
You cannot switch the screen between the Copy and Simple Copy services. Return to
the [Services Home] screen, and then select a service. In that case, the settings
specified in either service are cleared.
IC Card Copy
z
The machine does not shift the ID card image to the center of the output in any
magnification ratio and image size you specified.
z
When the reduced size is specified to copy an ID card, the machine may copy the ID
card in a different orientation from the original orientation depending on the
magnification ratio specified.
Notes and Restrictions on the Use of the Print Feature
Output of Long Feed Documents
The output of long feed documents is not supported.
PostScript Driver
Some options such as Poster (Photo Enlargement) are not supported by the PostScript
driver. With the Multiple-Up feature, you can specify 2, 4, 6, 9, or 16 pages up, and with
or without frame borders.
Printing from Macintosh via USB Connection
When you send a print job from the PostScript driver of Macintosh connected via USB
and the job includes application data with graphic data (EPS file including binary data)
pasted, the machine may misidentify the binary data as protocol data; therefore, the
output of text data may extend for multiple pages.
In this case, select [RAW] for [Adobe Communication Protocol] under [Tools] >
[Connectivity & Network Setup] > [Port Settings] > [Parallel] or [USB] to properly print
data which includes EPS files with binary data.
ContentsBridge
With ContentsBridge, you can print PDF, TIFF, JPEG, and XPS data by drag and drop.
To print DocuWorks documents, however, DocuWorks Viewer Light (free distribution)
or DocuWorks 6.0 or later (purchase separately) is required. PDF and TIFF print data
will be transferred to the machine directly, whereas DocuWorks document data will be
first processed by the client computer, and then transferred to the machine and printed.
To Next Page
Loading...
