Replacing Consumables
63
Maintenance
3
When replacing the waste toner container, clean the LED printhead with the supplied
cleaning bar to prevent inconsistencies in density or color in copies and prints.
Important • Do not touch the five gray-colored sponge parts on the back side of the waste toner
container. Otherwise, your hands may get dirty with toner.
• When replacing the waste toner container, toner may spill and soil the floor. We recommend
laying paper on the floor beforehand.
• The proper disposal of used waste toner containers is required. Return the old waste toner
container to our Customer Support Center.
• The use of waste toner containers not recommended by Fuji Xerox may degrade image
quality and performance. Use only waste toner containers recommended by Fuji Xerox.
1 Make sure that the machine is not operating,
and open the front cover.
2 Pull out the toner cartridge slowly while
holding its left side with one hand.
3 Prepare a new waste toner container out of a
box.
WARNING
z
Use a broom or a wet cloth to wipe off spilled toner. Never use a vacuum cleaner
for the spills. It may catch fire by electric sparks inside the vacuum cleaner and
cause explosion. If you spill a large volume of toner, contact your local Fuji Xerox
representative.
z
Never throw a waste toner container into an open flame. Toner may catch fire and
cause burn injuries or explosion.
If you have a used waste toner container no longer needed, contact your local Fuji
Xerox representative for its disposal.
Waste Toner Container
To Next Page
Loading...
