Replacing Consumables
71
Maintenance
3
1 Make sure that the machine is not operating,
and open the finisher front cover.
2 Grasp the handle and pull out the staple
cartridge holder to the right, towards you.
3 Take the staple cartridge out of the finisher.
Note • The staple cartridge is firmly inserted. A
slight force is required to pull the cartridge
out of the finisher.
4 Pinch both sides of the empty staple case
with your fingers (1), and remove the staple
case from the cartridge (2).
5 Insert the front side of the new staple case
into the staple cartridge (1), and then push
the rear side into the cartridge (2).
To Next Page
Loading...
