Job Assembly
161
Copy
3
[Segment Separators] Screen
This screen allows you to insert a sheet of paper as a separator in between each stack of
documents. You can specify the number of separators to insert in the range from 1 to 99 as
necessary.
Note • You can specify different settings for each stack of documents. If you do not specify particular
settings for each stack of documents, the previously specified settings are applied.
1 Select any option.
2 Select any option.
îš„ No Separators
Does not insert any separators.
îš„ Blank Separators
Inserts blank separators.
If you select this option, load documents, and press the <Start> button, the blank separators
are inserted before the copies of the documents.
îš„ 1 Sided Side 1 Only
A first page of the loaded documents is copied on the front side of a separator, and the rest
of the pages are copied on the paper other than a separator.
When [Pages per Side] is set, the number of pages (2 pages, 4 pages, or 8 pages) that you
selected to copy onto one side of a single sheet, starting from the first page of the loaded
documents, are copied onto the front page of a separator.
When you load a single sheet document, the document is copied onto a separator.
îš„ 1 Sided Side 2 Only
A first page of the loaded documents is copied on the back side of a separator, and the rest
of the pages are copied on the paper other than a separator.
When [Pages per Side] is set, the number of pages (2 pages, 4 pages, 8 pages) that you
selected to copy onto one side of a single sheet, starting from the first page of the loaded
documents, are copied onto the back side of a separator.
When you load a single sheet document, the document is copied onto a separator.
îš„ 2 Sided Separators
First two pages of the loaded documents are copied onto each side of a separator, and the
rest of the pages starting from the third page are copied onto the paper other than a
separator.
When [Pages per Side] is set, the number of pages (2 pages, 4 pages, 8 pages) that you
selected to copy onto one side of a single sheet, starting from the first page of the loaded
documents, are copied onto each side of a separator.
When you load two-sheet documents, both sheets are copied onto each side of a separator.
Note • When you have two separate documents, a single sheet document and multiple sheet documents, if
you want to copy this single sheet document and the first page of the multiple sheet documents
onto each side of a separator, when loading the multiple sheet documents, select [No Separators] in
[Segment Separators]. If you do not select [No Separators], the machine processes these two
To Next Page
Loading...
Need help?
General
