Fuji Xerox DocuCentre-V C3375 User Manual

8 Stored Programming
382
Stored Programming
8
Calling a Stored Program for Build Job
You can call a stored program for Build Job on the [Copy] screen displayed while Build Job
is running.
1 Select [Change Settings].
2 Select the [Job Assembly] tab.
3 Select [Stored Programming].
4 Select a number of a stored program containing the features you want to use.
Note • You can only select registered numbers.
• After the stored program has been called, the machine sounds an audible tone. If a failure occurs,
the machine sounds a fault tone.
For information on how to change the volume of the sound that notifies that a stored program has been called, refer to "5
Tools" > "Common Service Settings" > "Audio Tones" > "Stored Programming Complete Tone" in the Administrator Guide.

Fuji Xerox DocuCentre-V C3375 Specifications

General

Print Resolution	1200 x 2400 dpi
Duplex Printing	Yes
Memory	2 GB
Hard Disk	160 GB
Warm-up Time	30 seconds or less
Scan Resolution	600 x 600 dpi
Type	Multifunction Printer
Functions	Print, Copy, Scan, Fax
Max Paper Size	A3
Operating System Compatibility	Windows, Mac OS, Linux
Connectivity	USB, Ethernet
Paper Size	A3, A4, A5, B4, B5, Custom sizes
Scan Speed	70 ipm (A4, duplex)
Fax Resolution	400 x 400 dpi