Copying Procedure
89
Copy
3
2 Select [Copy].
3 If the previous settings still remain, press the
<Clear All> button.
4 Select each tab, and configure features as
necessary.
The following shows the reference section for each tab.
"Copy" (P.100)
"Image Quality" (P.112)
"Layout Adjustment" (P.118)
"Output Format" (P.131)
"Job Assembly" (P.158)
Step 3 Entering a Quantity
You can enter up to 999 sets.
1 Enter the number of copies using the numeric
keypad. The number of copies entered appears
on the upper right of the touch screen.
To Next Page
Loading...
