Fax/Internet Fax Options
239
Fax
4
Note • The profiles that can be processed differ depending on the Internet Fax-compatible machine of the
recipient. Before specifying a profile, confirm the profiles the Internet Fax-compatible machine of
the recipient can process.
• If inconsistency occurs between a profile, and stored document size and resolution, priority is given
to the settings specified in the profile.
• If the profile differs for each recipient when using Broadcast Send, the smallest size becomes the
maximum image size.
You can set an Internet Fax profile for each address number. For information on how to register address numbers, refer to
"5 Tools" > "Setup" > "Add Address Book Entry" in the Administrator Guide.
You can change the default value of [Internet Fax Profile] in the System Administration mode. For information on how to
change the default value, refer to "5 Tools" > "Fax Service Settings" > "Fax Defaults" > "Internet Fax Profile" in the
Administrator Guide.
1 Select [Internet Fax Profile].
2 Select any option.
îš„ TIFF-S
This profile is the Internet Fax standard. For documents that are larger than A4, the size is
reduced automatically to A4 for transmission.
Note • [TIFF-S] is not available when [Superfine (400 dpi)] or [Superfine (600 dpi)] is selected in [Resolution]
on the [Fax/Internet Fax] screen.
îš„ TIFF-F
Select this profile when you specify super-fine for the resolution or when you send A3 or B4
documents.
Note • When a fax is sent to a machine that does not support TIFF-F, the recipient’s machine will not be
able to display or print the images.
z
Encoding method : MH
z
Stored document size : A4
z
Resolution : Standard (200 x 100 dpi), Fine (200 dpi)
z
Encoding method : MMR
z
Stored document size : A4, B4, A3
z
Resolution : Standard (200 x 100 dpi), Fine (200 dpi),
Superfine (400 dpi), Superfine (600 dpi)
To Next Page
Loading...
Need help?
General
