Safety Notes
27
Before Using the Machine
1
1 Switch the power off.
2 Open the front cover.
3 Press the main power switch to the [ ]
position to switch the main power off.
4 Press the <RESET> button to the reset position.
The button will be depressed even after the
pushing force is released.
5 Press the <TEST> button lightly with a sharp
edge such as a pen tip. The depressed <RESET>
button will stick out again. This is the end of the
check procedure.
A ground fault interrupter is embedded in this product. If current leakage occurs,
the ground fault interrupter automatically cuts off power circuit to prevent electric
shock and a fire accident. The ground fault interrupter is normally ON. Check once
a month if the ground fault interrupter works properly in accordance with the
following procedures:
To Next Page
Loading...
