Error Code
477
Problem Solving
14
026-726
[Cause] The machine configuration information at a print job specification does not match the
actual machine configuration.
[Remedy] Modify the machine configuration information in the print driver screen to match the
actual machine configuration.
026-727
[Cause] Probable causes are as follows:
1)Unusable characters are included in the path name of the file location.
2)The length of the path name of the file location (including extension) exceeds the
number of characters available.
[Remedy] Take one of the following measures:
1)Change the path name of the file location.
2)Set the path in the range of 1 to 255 bytes.
026-728
[Cause] An error occurred during WSD communications.
[Remedy] Check whether the network cable is correctly connected or check the amount of
available memory of the destination device.
026-729
[Cause] Probable causes are as follows:
1)An error occurred during WSD communications.
2)Application other than [Windows Fax and Scan] was used to scan a document on the
scanner (WSD).
[Remedy] For 1), check whether the network cable is correctly connected or check the amount of
available memory of the destination device.
For 2), Use [Windows Fax and Scan] to scan. If using another application, set the
document on the document glass.
Note •WSD stands for Web Services on Devices.
026-730
[Cause] The size of paper loaded in the specified tray is unknown.
[Remedy] Check whether the paper guides are correctly positioned in the tray, and then try again.
026-736
[Cause] An internal error occurred while sending the scanned document to the HTTP server.
[Remedy] Execute the operation again. If the error still is not resolved, contact our Customer
Support Center.
026-737
[Cause] Unable to send the scanned document to the HTTP server because a network error
occurred.
[Remedy] Consult your network administrator whether the network or the server have any
problem.
026-738
[Cause] The machine failed to send scanned document data to the HTTP server because Web
application is closed during it.
[Remedy] Execute the operation again.
026-739
[Cause] When authentication succeeds, all jobs are canceled because there is a pending job.
[Remedy] No measure is required.
027-442
[Cause] The IP address of IPv6 already network exists.
[Remedy] Change the [Auto Stateless Address 1] for IPv6 on the machine, or the IP address of
IPv6 on the network device, to remove the duplication of addresses.
027-443
[Cause] The IP address of IPv6 already exists.
[Remedy] Change the [Auto Stateless Address 2] for IPv6 on the machine, or the IP address of
IPv6 on the network device, to remove the duplication of addresses.
Error Code Cause and Remedy
To Next Page
Loading...
Need help?
General
