Fuji Xerox DocuPrint CP225 w User Manual

114 Using the Operator Panel Menus
• Adjust BTR
Purpose:
To specify the optimum voltage settings for printing for the transfer roller (BTR). To lower the voltage, set negative
values. To increase, set positive values.
The default settings may not give the best output on all paper types. If you see mottles on the print output, try to
increase the voltage. If you see white spots on the print output, try to decrease the voltage.
NOTE:
• The print quality changes depending on the values you select for this item.
Values:
• Adjust Fusing Unit
Purpose:
To specify the optimum temperature settings for printing for the fusing unit. To lower the temperature, set negative
values. To increase, set positive values.
The default settings may not give the best output on all paper types. When the printed paper has curled, try to lower
the temperature. When the toner does not fuse on the paper properly, try to increase the temperature.
NOTE:
• The print quality changes depending on the values you select for this item.
Values:
Plain 0*
-3 – 3
Bond 0*
-3 – 3
Light Card 0*
-3 – 3
LW Gloss Card 0*
-3 – 3
Labels 0*
-3 – 3
Recycled 0*
-3 – 3
Envelope 0*
-3 – 3
Plain 0*
-3 – 3
Bond 0*
-3 – 3
Light Card 0*
-3 – 3
LW Gloss Card 0*
-3 – 3
Labels 0*
-3 – 3
Recycled 0*
-3 – 3
Envelope 0*
-3 – 3

Fuji Xerox DocuPrint CP225 w Specifications

General

Brand	Fuji Xerox
Model	DocuPrint CP225 w
Category	Printer
Language	English