Using the Operator Panel Menus 121
• Draft Mode
Purpose:
To save toner by printing in the draft mode. The print quality is reduced when you print in the draft mode.
Values:
• Line Termination
Purpose:
To add the line termination commands.
Values:
•Output Color
Purpose:
To specify the output color.
Values:
PS Settings
Use the PS Settings menu to change printer settings that only affect jobs using the PostScript 3 Compatible
printer language.
NOTE:
• The value marked by an asterisk (*) is the factory default setting.
• PS Error Report
Purpose:
To specify whether to print the contents of PostScript 3 Compatible errors.
Values:
NOTE:
• Instructions from the PS driver override the settings specified on the operator panel.
Disable* Does not print in the draft mode.
Enable Prints in the draft mode.
Off* The line termination command is not added.
CR=CR, LF=LF, FF=FF
Carriage Return The CR command is added.
CR=CR, LF=CR-LF, FF=CR-FF
Line Feed The LF command is added.
CR=CR-LF, LF=LF, FF=FF
CR + LF The CR and LF commands are added.
CR=CR-LF, LF=CR-LF, FF=CR-FF
Color* Prints in the color mode.
Black & White Prints in the black and white mode.
On* Prints an error message before it discards the job.
Off Discards the print job without printing an error message.
To Next Page
Loading...
