Printing Basics 79
Loading Print Media
Loading print media properly helps prevent jams and ensures trouble-free printing.
Before loading print media, identify the recommended print side of the print media. This information is usually on the
print media package.
NOTE:
• After loading paper in the standard 150 sheet tray, specify the same paper type on the print driver.
Capacity
The standard 150 sheet tray can hold:
• 150 sheets of standard paper
• 16.2 mm (0.64 inches) of thick paper
• One sheet of coated paper
• Five envelopes
• 16.2 mm (0.64 inches) of labels
Print Media Dimensions
The standard 150 sheet tray accepts print media within the following dimensions:
• Width: 76.2 – 215.9 mm (3.00 – 8.50 inches)
• Length: 127 – 355.6 mm (5.00 – 14.00 inches)
Loading Print Media in the Standard 150 Sheet Tray
NOTE:
• To avoid paper jams, do not remove the tray while printing is in progress.
• Use only laser print media. Do not use ink jet print media in this printer.
1 Hold the tray with both hands, and remove it from the printer.
To Next Page
Loading...
Need help?
General
