EasyManua.ls Logo

Fuji Xerox DocuPrint CP225 w

Fuji Xerox DocuPrint CP225 w
187 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
110 Using the Operator Panel Menus
•Protocol
Purpose:
To enable or disable each protocol. The change becomes effective after the printer is turned off and then on.
Values:
*1
To add a printer using an IPP port on Windows
®
, insert port number "631" in the URL of the printer.
For example: http:// [Printer's IP address]:631/ipp
*2
HTTP-SSL/TLS is displayed when a certificate is created using the CentreWare Internet Services. For details about creating a
certificate, see the Help on the CentreWare Internet Services.
•IP Filter
Purpose:
To block data received from certain IP addresses through the wired or wireless network. You can set up to five IP
addresses.
Values:
NOTE:
This item is only available for LPD or Port 9100.
Initialize NVM
Purpose:
To initialize network data stored in Non-Volatile Memory (NVM). After executing this function and rebooting the
printer, all network settings are reset to their default values.
LPD Enable* Enables the LPD port.
Disable Disables the Line Printer Daemon (LPD) port.
Port 9100 Enable* Enables the Port 9100 port.
Disable Disables the Port 9100 port.
IPP*
1
Enable* Enables IPP.
Disable Disables IPP.
WSD
(Web Services on
Devices)
Enable* Enables the Web Services on Devices (WSD) port.
Disable Disables the Web Services on Devices (WSD) port.
SNMP v1/v2c Enable* Enables SNMP v1/v2c.
Disable Disables SNMP v1/v2c.
Status
Messenger
Enable* Enables Status Messenger.
Disable Disables Status Messenger.
Internet
Services
Enable* Enables Internet Services.
Disable Disables Internet Services.
Bonjour(mDNS) Enable* Enables Bonjour (mDNS).
Disable Disables Bonjour (mDNS).
HTTP-SSL/TLS
*2
Enable* Enables HTTP-SSL/TLS.
Disable Disables HTTP-SSL/TLS.
Google Cloud
Print
Disable* Disables Google Cloud Print™.
Enable Enables Google Cloud Print.
No.n/Address
(n is 1 – 5.)
Sets the IP address for Filter n.
No.n/Mask
(n is 1 – 5.)
Sets the address mask for Filter n.
No.n/Mode
(n is 1 – 5.)
Off* Disables the feature for Filter n.
Accept Accepts an access from the specified IP address.
Reject Rejects an access from the specified IP address.

Table of Contents

Related product manuals