EasyManua.ls Logo

Fuji Xerox DocuPrint CP225 w

Fuji Xerox DocuPrint CP225 w
187 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Specifications 15
Supported Protocol TCP/IP (IPv4/IPv6, LPD, IPP, IPPS, Port9100, WSD, HTTP, HTTPS, RARP,
AutoIP), SNMP, DHCP, DHCPv6, BOOTP, Bonjour (mDNS), AirPrint, Google
Cloud Print
NOTE:
WSD stands for Web Services on Devices.
Power Supply AC 100 – 127 V ± 10%; 7 A; both 50/60 Hz ± 3 Hz
AC 220 – 240 V ± 10%; 5 A; both 50/60 Hz ± 3 Hz
IMPORTANT:
Power outlets that provide the above power level are recommended.
Operating Noise During operation:
Color: 6.4 B; 49.1 dB (A)
Monochrome: 6.4 B; 48.2 dB (A)
During stand-by: 3.5 B; 19.6 dB (A)
IMPORTANT:
Measurements based on ISO7779
Unit B: acoustic power level (LwAd)
Unit dB (A): radiated sound pressure (bystander position)
Power Consumption Maximum: 605 W, During sleep mode of power saver mode: 1.6 W or less
Average:
During standby: 38 W
During continuous color printing: 281 W
During continuous monochrome printing: 320 W
IMPORTANT:
Low power mode of power saver mode: 10 W average
(The printer does not use electricity when the power is switched off even with
the power cord is plugged in.)
Dimensions 397 (W) 398 (D) 246 (H) mm
Weight Approximately 12.3 kg (including toner cartridges)
Usage Environment During Use: Temperature: 10 – 32°C; Humidity: 10 – 85% (except malfunctions
due to dew condensation)
Non-Use: Temperature: -20 – 40°C; Humidity: 5 – 85% (except malfunctions due
to dew condensation)
IMPORTANT:
Until the conditions (temperature and humidity) inside the printer become
acclimated to the installation environment, certain conditions of paper can
cause poor printing quality.
Items Description

Table of Contents

Related product manuals