Printing Basics 85
Loading Print Media in the Standard 150 Sheet Tray
1 Print the even pages (back sides).
For a six-page document, back sides are printed in the order of page 6, page 4, then page 2.
The (Error) indicator lights and Insert Output and Press OK appears on the LCD panel when the
printer finishes printing the even pages.
2 After the even pages are printed, remove the paper stack from the center output tray.
NOTE:
• Warped or curled paper can cause paper jams. Straighten them before setting.
3 Stack the paper and set them as they are (with the blank side facing up) into the standard 150 sheet tray.
Pages are printed in the order of page 1 (back of page 2), page 3 (back of page 4), and then page 5 (back of
page 6).
NOTE:
• Printing on both sides of the paper is not possible if the document consists of various sizes of paper.