6 General Settings
120
[Power on Self Test]
Set whether or not to perform self test when the device is turned on.
If any abnormal condition such as intentional program modification is found during the
program diagnosis, the device stops starting up and records the information in the audit
log.
The information may not be recorded in the audit log depending on the status of program malfunction.
[Check Smart Card Details]
When you select [Check Smart Card Details] and touch your smart card to the IC Card
Reader (optional), the information of the smart card appears on the touch screen.
You can register the authentication information using CentreWare Internet Services. For more information,
refer to the help of CentreWare Internet Services.
[Delete All Certificates / Initialize Settings]
Deletes all certificates stored in the device and initializes the security settings associated
with certificates. This feature is designed to use when you cannot use a certificate data in
the device because of an abnormality of certificate file even when the certificate is set to
enabled for [SSL/TLS Settings] under [Connectivity & Network Setup] > [Security Settings].
[Non-Genuine Toner / Drum Cartridge]
Set this feature when using device in the custom mode.
Use with supported toner and drum.
Using this setting may not maintain the device’s sufficient feature and performance, and we do not certify
the performance. Keeping using the non-genuine product may put the device out of order and you are liable
for the cost of repairs.
When you select [Yes], the toner and drum cartridge remaining are not displayed.
[Image Quality]
[Adjust Paper Registration]
Allows you to make an adjustment to match the positions of the images with paper.
For detailed procedure, refer to "Adjust Paper Registration" (P.232).
[Calibration]
Calibrate the color tone easily when the printed image indicates a color tone shift.
Performing the calibration retains the print quality of the device at a constant level.
For more information, refer to "Calibrating the Color Tone" (P.227).
[NVM Read / Write]
Adjusts the device operations.