Fuji Xerox DocuPrint CP475 AP User Manual

2 Setup
30
Interface Cables
Using the Ethernet Interface
Note

The following problems may be resolved by disabling [Energy Efficient Ethernet] under [Device] >
[Connectivity & Network Setup] > [Protocol Settings] > [Ethernet Settings].

Slow network connection on the device

Unstable network condition of the device which causes frequent timeout errors

The device fails to connect to the network after returning from a long-term Sleep mode
1 Press the Power button and select [Power Off] to switch off the power.
2 Make sure that the touch screen is blank and the Power button is not lit.
3 Connect a network cable to the Ethernet interface connector.
4 Press the Power button to switch on the power.
Using the USB Interface
1 Press the Power button and select [Power Off Device] to switch off the power.
2 Make sure that the touch screen is blank and the Power button is not lit.
3 Connect the USB cable to the interface connector.
4 Connect the other end of the USB cable to the computer.

Fuji Xerox DocuPrint CP475 AP Specifications

General

Brand	Fuji Xerox
Model	DocuPrint CP475 AP
Category	Printer
Language	English