Adjust Image Transfer
235
Adjust Image Transfer
You can specify the transfer output value manually. This is useful when the toner image
does not transfer to the paper properly.
Adjusting the Transfer Output Value
You can specify the image transfer output value for each paper type.
Adjusting the transfer output value manually
1
Tap [Device] on the Home screen.
2
Tap [Maintenance] > [Adjust Image Transfer].
3
Select the paper type to adjust on [Paper Type].
4
Change the value of [Adjustment Value].
5
Tap [Adjust].
The specified transfer output values apply to subsequent printouts.
To Next Page
Loading...
