7 Advanced Settings
128
[Fault Clear Tone]
Set the volume to be sounded when an occurring error is resolved and the device is ready
for operation.
[Login Tone]
Set the volume to be sounded when the system administrator or a user logs in to the device.
[Power Off Tone]
Set the volume to be sounded when the power of the device is switched off.
[Mobile Device Connection Tone]
Set the volume to be sounded when the device detects a connection from any mobile
device.
[Screen Settings]
[Default Language], [Button Color Scheme], and [Suppress Notification Banner] are displayed when the latest
software is installed.
[Screen Default]
Set the screen displayed after powering on the device or canceling the Power Saver mode.
[Default Language]
Select the language displayed by default.
[Screen After Auto Clear]
Set the screen displayed after Auto Clear.
[Auto Display of Login Screen]
When the Authentication feature is enabled on the device, set whether or not to
automatically display the login screen after turning on the device or canceling the Power
Saver mode.
[Button Color Scheme]
If [Highlight] is selected, the Start, Pause, and Reset buttons common to all screens will be
highlighted.
[Screen Brightness]
Adjusts the brightness of the touch screen.
The screen image on the bottom of the adjustment slider is a display sample.
[Display Supplies Screen]
Allows you to select whether or not to display the consumables status when a replacement
is required.
[Screen After Inserting USB]
Set whether or not to display the screen when the device detects USB memory device
insertion, and also set the screen type at the time.
To Next Page
Loading...
Need help?
General
