[Connectivity & Network Setup]
159
[Search Directory Root]
Enter a search root character string.
[Search Scope]
Set the search range from the root entry.
[Object Class of Search Target]
Enter the object class to search.
[LDAP Referrals]
Specify whether or not to re-establish connection to another LDAP server if a currently
connected LDAP server requests to do so.
[LDAP Referral Hop Limit]
When using the Referral feature, specify how many times that a user is allowed to hop
servers.
[SMB Server Settings]
Set the following items to use SMB server as a remote authentication server.
[SMB Server Setup]
Select the server specification method from [By Domain Name] and [By Domain & Server
Names / IP Address].
According to the option you selected here, set [Domain Name] and [Server Name / IP
Address] for SMB servers 1 to 5 respectively.
The setting for SMB server 1 is used as the default setting for authentication.
[SMB Server 1 (Default)] to [SMB Server 5]
[Domain Name]
Enter the domain name of the server.
You must set the domain name regardless of the SMB server specification method set in
[SMB Server Setup].
Use the NetBIOS or Active Directory domain name for the domain name.
[Server Name / IP Address]
Enter the server name or IP address.
Use the NetBIOS computer name or full computer name with DNS suffix for the server name.
[Security Settings]
[SSL/TLS Settings]
Configure the SSL/TLS settings to encrypt the communication between the server or the
client computer and the device. Enabling SSL/TLS protects the communication from an
unauthorized access and prevents information leakage or data falsification.
[Device Certificate - Server]
Select a certificate for HTTP SSL/TLS communications.
To Next Page
Loading...
