[Authentication / Accounting]
171
[Use of Smart Card]
Set whether or not to use smart card authentication when the IC Card Reader (optional) is
installed on the device.
Selecting [Enabled] allows you to set whether or not to control jobs by smart card per each
feature.
Set to [Enabled (PKI Only)] to restrict only the security feature without using a smart card
for authentication and job restriction.
This item is displayed when the Extensible Customization Function is set to be enabled.
[Smart Card Link Mode]
Set whether or not to require a password for smart card authentication when [Log In to
Remote Accounts] is selected.
[Smart Card Certificate Verification]
Set whether or not to verify the smart card certificate when a user uses the smart card.
When you put a checkmark, the owner of the smart card is verified not only by PIN code
verification but by certification verification of the smart card and private key match. In this
case, the upper level CA certificate of the smart card certification must be registered on the
device.
When you clear the checkmark, the owner of the smart card is verified by PIN code
verification.
[Smart Card Logout Timing]
Select the logout method for smart card authentication when a contactless smart card is
used for authentication.
When [Log Out when Card is Removed] is selected, removing the smart card from the IC
Card Reader (optional) releases the login status. When [Log Out from Control Panel] is
selected, operating the touch screen is required to release the login status.
[Save Remote Accounts in This Device]
Select whether or not to save the user information used for remote authentication. While
the user information is saved in the device, the device can authenticate the user using the
information saved in the device even when the remote server is off.
This setting applies only to a user who is authenticated by smart cards.
The user authenticated by using the information saved in the device is set to [(Remote Authorization Groups
As Saved In This Device)].
[Delete Remote Accounts]
Select whether or not to delete the user information saved in the device for remote
authentication.
This setting applies only to a user who is authenticated by smart cards.
To Next Page
Loading...
Need help?
General
